• Home
  • HOME
  • Products
  • Products
  • Artists
  • News
  • Company
210-Mic

210-Mic

Omnidirectional Adjustable Line Output “button” Microphone with Limiting Circuitry - White

• Adjustable Line-level output
• Omnidirectional pick-up pattern
• Integrated high-pass filter for improved intelligibility
and voice articulation
• Integrated limiter maintains near/far signal integrity
• All-metal housing suitable for commercial applications
• Mounting hardware included
• RF (radio frequency) Resistant Architecture
• Shock-absorbing polymer bushings included
• Inconspicuous design

210-Mic

210-Mic

210-Mic

Omnidirectional Adjustable Line Output “button” Microphone with Limiting Circuitry - White

• Adjustable Line-level output
• Omnidirectional pick-up pattern
• Integrated high-pass filter for improved intelligibility
and voice articulation
• Integrated limiter maintains near/far signal integrity
• All-metal housing suitable for commercial applications
• Mounting hardware included
• RF (radio frequency) Resistant Architecture
• Shock-absorbing polymer bushings included
• Inconspicuous design

starting at: $269.00


Product Details & Downloads

Overview

• Adjustable Line-level output
• Omnidirectional pick-up pattern
• Integrated high-pass filter for improved intelligibility
and voice articulation
• Integrated limiter maintains near/far signal integrity
• All-metal housing suitable for commercial applications
• Mounting hardware included
• RF (radio frequency) Resistant Architecture
• Shock-absorbing polymer bushings included
• Inconspicuous design

Details

The Astatic 210 is a miniature-boundary microphone designed for installation in security, ambient monitoring and observation applications. The output level is variable from -50dBv (3.2mV) to -10.5dBV (300mV) @ 1μBar which is designed to interface with security cameras, digital video recorders and other observation and recording devices.
Astatic’s internal audio limiter circuitry tames high sound pressure levels and improves intelligibility by protecting the audio signal from distorting sensitive recording circuitry in cameras and digital recorders. The integrated volume control is located on the side of the microphone and is protected from tampering when the microphone is installed. The integrated 150Hz, 6dB/oct high-pass filter attenuates unwanted low frequency energy.
+9 to 24VDC (70mA) is required to power the microphone (not supplied). The connection is made through a removable 3.5mm terminal block plug connector on the opposite end of the microphone. The connector accepts DC power and outputs
an unbalanced, amplified signal.
The Astatic 210 housing is all-metal, designed for commercial applications. The threaded housing makes for easy installation into ceilings, walls, tables and other surfaces. Rubber isolation bushings and metal nut/washer hardware are also provided.

Operating Principle….........................................Condenser

Polar Pattern…..............................................Omnidirectional
Frequency Response…....................................120Hz -18KHz
Sensitivity…..........................Adjustable, -50dBV (3.2mV) to
-10.5dBV (300mV) @ 1 μBar
Impedance…............................................................50 ohms
Maximum SPL…..........................................................100dB
Self Noise….................................................................22dBA
Power Requirements….........................+9 to 24VDC, 70mA
(Important: Do not exceed 24VDC)
Connector…........................3.5 mm terminal block plug with
180 degree wire-to-plug orientation,
accepting 30 to 14AWG size wire.
Polarity…..............................Positive pressure on diaphragm
corresponds to positive
voltage on pin 2.
Finish…...................................Durable matte-white urethane
Dimensions…...................................................(See drawing)
Net Weight [Mass]............................................2.4oz [.07Kg]
Packaged Weight [Mass]..................................5.4oz [.15Kg]
RF Immunity….......................Meets or exceeds EN55103-2,
E1, E2, E3 and E4
RoHS Compliant
†Specifications subject to change without notice.
Included Accessories…............................2 rubber bushings,
hex nut and washer.
Architects’ and Engineers’ Specifications
The microphone will be an inconspicuous, omnidirectional, button-style, condenser boundary microphone designed for surface installation. The integrated limiter will maintain near/far signal integrity. The sensitivity of the microphone will be -50dBV (3.2mV) to -10.5dBV (300mV) @ 1 μBar. The frequency response will be 120Hz to 18KHz. The impedance of the microphone will be 50 ohms. The self noise will be 22dBA. The maximum SPL will be 100dB.
The microphone will include an integral 150Hz, 6dB/oct
high-pass filter to improve intelligibility. The microphone will have a removable 3.5mm terminal block plug with 180 degree wire-to-plug orientation, accepting 30 to 14AWG size wire.
The microphone will be externally powered with an 9 to 24VDC 70mA source (not supplied). The microphone element and electronics will be enclosed in a radio frequency resistant housing meeting or exceeding EN55103-2.
The microphone will be 3-3/8” [85mm] long including the euro-connector plug, 1-1/8” [28mm] in diameter and will mount in a 15/16” [24mm] diameter hole. The microphone will stand no more than 1/2” [13mm] above the boundary when the included rubber bushings are used. The net weight [mass] will be 2.4oz [.07Kg]. The packaged weight [mass] will be 5.4oz [0.15Kg]. The microphone will have durable matte-white urethane finish.
The Astatic model 210 is specified.

Media & Artists

Related Products


Acousti-Shield
USB
Sessions
Cad Live
Equitek
Astatic
GXL
StageSelect